INTRODUCTION
VisiSet™ Illuminator Management Procedure
1. Connect the reader to VisiSet™ as described in the Quick Reference Guide.
2. In the VisiSet™ Tools menu click the "Set Lighting System Part Number" item and select
the Illuminator being used from the list.
3. Click OK and wait until VisiSet™ resets. You can confirm by selecting the "Get Lighting
System Part Number" item from the same menu.
The above procedure must also be performed before any attempt to use the X-PRESS™
configuration on readers mounting the LT-005, LT-010 or LT-011 illuminators.
2.8 APPLICATION EXAMPLES
2.8.1 Document Handling
Matrix 410™ is profitably used in the omnidirectional reading of 2D, stacked, linear and
postal codes for example in automated document handling and mail processing systems
(see Figure 21).
Figure 21 - Address Coded in Data Matrix Symbology for Automated Mail Processing
2.8.2 Multiple Code Reading in a Single Image
The Matrix 410™ high resolution image sensors allow the reading of many small codes in a
single image (see 96 vial application in Figure 22).
Figure 22 - 96-Vial Rack
Comments to this Manuals