MATRIX 410™ CONNECTOR ELECTRICAL CONNECTIONS
5.3.1 Ultra High Power Illuminator Models
Matrix 410 655-0x0 models require 24 Vdc. Power must be supplied to both the reader
(19-pin connector) and the Ultra High Power internal illuminator (M12 4-pin male connector).
Figure 74 - M12 4-pin Male Ultra High Power Illuminator Input Power Connector
Ultra High Power Illuminator M12 4-Pin Male Input Power Connector pinout
Power supply input voltage positive
Power supply input voltage positive
Power supply input voltage negative
Power supply input voltage negative
5.4 MAIN SERIAL INTERFACE
The signals relative to the following serial interface types are available on the M16 19-pin
connector:
The main serial interface type and its parameters (baud rate, data bits, etc.) can be
defined by the user via VisiSet™ software. The RS485 half duplex is automatically set
whenever MUX32 communication protocol is enabled. For more details refer to the
"Communication" folder in the VisiSet™ Help On Line.
Details regarding the connections and use of the interfaces are given in the next paragraphs.
Comments to this Manuals