MATRIX 410™ REFERENCE MANUAL
2.7.1 Lighting System Notes
The following table shows the correct lens/illuminator combinations to be used for Matrix
410™ imager assembly. For more information see the Application Note on illuminator
selection on the mini-DVD.
Red Wide Angle
White Wide Angle
93A401020
93A401022
93A401023
Red Wide Angle
White Wide Angle
Blue 8x4 LED chain for DPM
93A401020
93A401022
93A401023
Red Wide Angle
White Wide Angle
Blue 8x4 LED chain for DPM
93A401019
93A401021
93A401023
Red Narrow Angle
White Narrow Angle
Blue 8x4 LED chain for DPM
93A401019
93A401021
93A401024
93A401026
93A400031
LT-001
LT-003
LT-006
LT-010
LT-011
Red Narrow Angle
White Narrow Angle
Red Super Narrow Angle
High Power Blue Super Narrow Angle
High Power Red Super Narrow Angle
93A401024
93A401026
93A400031
Red Super Narrow Angle
High Power Blue Super Narrow Angle
High Power Red Super Narrow Angle
93A401024
93A401026
93A400031
Red Super Narrow Angle
High Power Blue Super Narrow Angle
High Power Red Super Narrow Angle
* LNS-1006 is only used for Matrix 410 600-0x0 models.
LT-005: In order to function properly, VisiSet™ must correctly manage the
illuminator parameters. Follow the VisiSet™ Illuminator Management
Procedure below.
LT-010 and LT-011: To avoid damage to the devices, VisiSet™ must
correctly manage the illuminator parameters. Follow the VisiSet™ Illuminator
Management Procedure below.
When using a 25 mm focal length lens (LNS-1125), it is possible to use Super Narrow Angle
Illuminators (LT-006, LT-010 or LT-011) as well as the Narrow Angle Illuminators LT-001 or
LT-003. It is suggested to use the Narrow Angle Illuminators in applications with very low
contrast codes and in all cases where the higher lighting power of the LT-006, LT-010 or LT-
011 isn't necessary. LT-010 and LT-011 Illuminators are especially effective in high speed
code movement applications.
Internal Lighting Mode Limitations using LT-010 and LT-011:
This Lighting System does not allow working in High Power Strobed mode.
If working in Very High Power Strobed mode, Region Of Interest windowing (image
cropping) is not allowed.
See the Help On Line for more details on these parameters.
Comments to this Manuals