Datalogic QLM500 Instruction Manual download pdf (Page 40)

MATRIX 410™ REFERENCE MANUAL

2.4 EXTERNAL MEMORY BACKUP AND RESTORE THROUGH

VISISET™

The "External Memory Backup" or "External Memory Restore" functions allow performing

Complete Configuration and Environmental parameter storage for network and reading

devices. Backup & Restore can be applied to any reader connected through a device having

External Backup Memory, regardless of the reader's network configuration. Backup &

Restore automatically checks whether a previous backup or configuration is already available

for each device, speeding the procedure up and making it more secure.

These functions are supported by VisiSet™ for all reading devices having sw 6.10 and later

when connected to:

CBX + BM100 and/or BM2x0 (sw release 2.02.01 and later)

QL500 (Ethernet TCP/IP) (sw release 2.02.01 and later)

QLM-Series Gateways (reading device sw release 6.50 and later)

NOTE

Before executing a Backup on a BM100 backup module make sure the Write

Protection switch is set to Unlocked.

If BM100 and BM2x0 are both installed B&R is automatically performed only on

the BM100 module.

BM2x0 can execute B&R only with Network up and running (network cable

connected).

QL500 can backup up to 10 nodes (Master + 9 slaves).

Backup

To perform a Backup:

1. Select "External Memory Backup" from the VisiSet™ Device menu

2. You will be warned that the previous backup will be overwritten. Confirm by clicking Yes.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 160 161

No comments

Datalogic QLM500 Instruction Manual Page 40