Datalogic PowerScan PBT9500 Specifications download pdf (Page 309)

Scanning Features

Product Reference Guide

299

Flash On Time

This feature specifies the ON time for the indicator LED while in Flash Mode.

The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in

100 millisecond increments.

Follow these instructions to set this feature.

1. Determine the desired setting in milliseconds.

2. Divide the desired setting by 100 (setti

ng is

in 100ms increments). Pad

the result with leading zeroes to yield two digits. For example: 0 = 00,

5 = 05, 20 = 20, etc.

3. Go to page 74 and scan the ENTER/EXIT PROGRAMMING MODE bar code

to enter Programming Mode.

4. Scan the bar code: SELECT FLA

H ON TIME SETTING.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad

representing the duration which was determined in the steps above.

You wi

ll hear a two-beep indication after the last character.

If you make a mistake before the last character, scan the CANCEL bar

code to abort and not save the entry string. You can then start again

at the beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Program-

ming Mode.

This completes the procedure. See Table 44 for examples of how to set this

feature.

Table 44. Flash On Time Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

500ms 1,000ms (1 sec.)

5200ms (5.2

sec.

)

9,900ms (9.9 sec.)

Divide by 100 (and pad

with leading zeroes to yield

two digits

)

05 10 52 99

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT FLASH ON TIME SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘5’ ‘1’ and ‘0’ ‘5’ and ‘2’ ‘9’ and ‘9’

6 Scan ENTER/EXIT PROGRAMMING MODE

1 2 ... 304 305 306 307 308 309 310 311 312 313 314 ... 361 362

Comments to this Manuals

No comments

Datalogic PowerScan PBT9500 Specifications Page 309

Comments to this Manuals

Related products and manuals for Bar code readers Datalogic PowerScan PBT9500