Datalogic PowerScan PBT9500 Specifications download pdf (Page 307)

Scanning Features

Product Reference Guide

297

Scanning Active Time

This setting specifies the amount of time that the reader stays in scan ON

state once the state is entered. The range for this setting is from 1 to 255

seconds in 1-second increments.

Follow these instructions to set this feature:

1. Determine the desired setting.

2. Pad the result with leading zeroes to yield three digits. For example: 0

= 000

5 = 005, 20 = 020, etc.

3. Go to page 74 and scan the ENTER/EXIT PROGRAMMING MODE bar code

to enter Programming Mode.

4. Scan the bar code: SELECT SCANNING ACTIVE

TIME SETTING.

5. Scan the appropriate three digits from the keypad in Appendix D, Key-

pad, that represent the duration which was determined in the steps

above. You will hear a two-beep indica

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar

code to abort and not save the entry string. You can then start again

at the beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Program-

ming Mode.

This completes the procedure. See Table 42 for some examples of how to

set this feature.

Table 42. Scanning Active Time Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

1 Second 90 Sec. (1.5 min.) 180 Sec. (3 min.)

255 Seconds (4.25

min.)

2 Pad leading zero(es)

001 090 180 255

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT SCANNING ACTIVE TIME SETTING

Scan Three Characters

From

Appendix D,

Keypad

‘0’, ‘0’ and ‘1’ ‘0’, ‘9’ and ‘0’ ‘1’, ‘8’ and ‘0’ ‘2’, ‘5’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

1 2 ... 302 303 304 305 306 307 308 309 310 311 312 ... 361 362

Comments to this Manuals

No comments

Datalogic PowerScan PBT9500 Specifications Page 307

Comments to this Manuals

Related products and manuals for Bar code readers Datalogic PowerScan PBT9500