Datalogic PowerScan PBT9500 Specifications download pdf (Page 289)

RS-232 Parameters

Product Reference Guide

279

Enable Character

Specifies the value of the RS-232 host command used to enable the reader.

ASCII characters or any hex value from

0 to 0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or

host commands conflicts with normal operation of these char-

acters. 8-bit data is not recognized when the option

Data Bits

has been set as 7 Data Bits.

To set this feature:

Determine the desired character or value. A setting of 0xFF indicates the

Enable

Character is not used (not available).

1. Determine the desired character or value.

2. Use the ASCII Chart on the inside back cover of

this

manual to find the

hex equivalent for the desired character/value.

3. Go to page 36 and scan the ENTER/EXIT PROGRAMMING MODE bar code

to enter Programming Mode.

4. Scan the bar code: SELECT ENABLE CHAR

ACTER SETTING.

5. Scan the appropriate two alphanumeric

characters from the keypad in

Appendix D, Keypad, that represent the desired ch

aracter/value in step

2 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Program-

ming Mode.

This completes the procedure. See Table 34 for some examples of how to

set this feature.

Table 34. Enable Character Setting Examples

STEP ACTION EXAMPLES

1 Desired character/value

‘e’ ‘}’ ‘E’

Enable Command

Not Used

Hex equivalent from

ASCII

Chart

0x65 0x7D 0x45 0xFF

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT ENABLE CHARACTER VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘6’ and ‘5’ ‘7’ and ‘D’ ‘4’ and ‘5’ ‘F’ AND ‘F’

6 Scan ENTER/EXIT PROGRAMMING MODE

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 361 362

Comments to this Manuals

No comments

Datalogic PowerScan PBT9500 Specifications Page 289

Comments to this Manuals

Related products and manuals for Bar code readers Datalogic PowerScan PBT9500