Datalogic Controller SC6000 Installation Manual download pdf (Page 8)

BHS AND REDS INSTALLATION MANUAL

1.4 TYPICAL STATION PARAMETERS

Conveyor Width: 1000 mm

Conveyor Height: 800 mm

Conveyor Speed: 2.5 m/s or higher

Package Height: 700 mm max.

Code Types: IATA 2/5IL 0.5mm module size Ratio=2:1 or greater

Code Quality: ANSI Grade A or B.

NOTE

For further details about Hardware or Software explanations, please refer to

the relative Reference Manual (PWO-480, SC6000, DS8100A, DX8200A

and the GENIUS™ SW configuration program Help On-Line). The

documentation is available on the GENIUS™ CD and on our Web Site.

1.5 STANDARD BHS PACKAGES

All the material according the BOM is packed inside a single box including: readers,

controllers, PWO, cables and device mounting brackets.

Each reading station is tested at the factory in order to avoid any possible failure or defects

during the installation phase that could generate delays or unpredictable costs and trouble.

Network configuration and other parameters are already pre-configured in order to have a

system ready to work and minimize the installation time.

The installation is completed in a few steps:

1. Frame installation

2. Device installation

3. ElectricalConnection and Hardware Switch Settings

4. PackTrack or Auto PackTrack calibration

5. Host communication setting

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 77 78

No comments

Datalogic Controller SC6000 Installation Manual Page 8