BHS AND REDS INSTALLATION MANUAL
2 MECHANICAL INSTALLATION
2.1 BHS STANDARD MOUNTING FRAME
The following BHS Standard Mounting Frame should be used for either the T-Label or the L-
Label Scanner Array. Datalogic Automation provides this frame as a commercially available
kit (PN 9K3L01068).
Figure 3 - BHS Standard Mounting Frame (9K3L01068)
Profile #7 is used for encoder mounting. Alternatively, profiles #15 and #16
can be used to mount the encoder directly to the conveyor frame. See
par. 2.2.5.
Install the
PWO here on
Profile #9.
Comments to this Manuals