Datalogic QLM500 Installation Manual download pdf (Page 40)

DS2400N REFERENCE MANUAL

3.2.2 Mounting a GFC-2020 Accessory Lateral Output Deflection Mirror

The GFC-2020 accessory is a Lateral Output deflection mirror which helps to position the

scanner body in a different orientation with respect to the code, for limited space applications.

CAUTION

Subzero model scanners must not be opened in an uncontrolled

environment.

The installation of the deflection mirror is very easy.

1. Make sure the device is not powered.

2. Remove the original 0° scanning window

from the scanner by unscrewing the two

cover screws.

Cover Screws

Figure 15 - Removing the 0° Scanning Window

CAUTION

Avoid any contact with the deflection mirror, mirrored rotor, the lenses or

other optical components; otherwise the performance of the reader will be

reduced.

3. Clean the mirror surface and reading window with a clean soft cloth and alcohol before

closing the scanner.

4. Mount the GFC-2020 accessory so that the opening face is at 90° with respect to the

scanner body. Tighten the two cover screws.

Figure 16 - Mounting a GFC-2020 Deflection Mirror

The reading position with respect to the scanner is shown below.

Laser Beam

GFC-2020

102° ± 2°

Figure 17 - GFC-2020 Laser Beam Output Position

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 118 119

No comments

Datalogic QLM500 Installation Manual Page 40