GWY-01-DNT-01 MANUAL – REV. 02 CHAPTER 5:
DEVICENET INTERFACE
PAGE 52 OF 67
9 Next, verify the mapping of the address where the PLC will retrieve output data
from the Gateway. In the image below, output data is mapped to start at
1:O.Data(0).0 on the PLC.
Figure 5-6: 1756-DNB/A Output Properties Tab
10 Lastly, click “Apply” and select “YES” to download the configuration and
mapping settings from RSNetWorx to the PLC.
Comments to this Manuals