Datalogic GWY-01-PBS-01 Specifications download pdf (Page 17)

GWY-01-DNT-01 MANUAL – REV. 02 CHAPTER 2:

GATEWAY OVERVIEW

PAGE 17 OF 67

2.1.3 DIP-Switch Setting

The operating modes are set by configuring one of the eight DIP-switches on the

unit’s main board. To access these DIP-switches, remove the four screws securing

the lid to the base of the enclosure. After removing the lid, locate the DIP-switch

block containing eight small DIP-switches.

The DIP-Switch # 2 selects the Gateway’s Operating Mode, thereby determining

whether the device powers-up in Subnet16 mode or in Mux32 mode.

• DIP-Switch 2 ON = Subnet16 (Default Setting)

When this DIP-switch is ON, upon power-up, the Gateway will enter Subnet16

mode, enabling the Subnet16 protocol and expanded feature set.

• DIP-Switch 2 OFF = Mux32

When this DIP-switch is OFF, upon power-up, the Gateway will enter Mux32

mode.

The user should NOT modify any other DIP-switch.

OFF

DIP-Switch # 2

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 66 67

No comments

Datalogic GWY-01-PBS-01 Specifications Page 17