Datalogic MAGELLAN 8400 Specifications download pdf (Page 112)

100

101

5-10 Magellan

8300/8400

Decreasing-Load Test

This test ensures that the scanner/scale responds properly when a heavy

object is followed by a significantly smaller object.

1. Place a 30.0-pound load on the scale and verify that the display

shows between 29.99 and 30.01 pounds.

2. Remove weights to leave 20 pounds on the scale. Check that the dis-

play shows between 19.99 and 20.01.

3. Remove another 15.0 pounds from the scale and check that the scale

reads 5.00 lb.

4. You have completed the Decreasing Load Test.

Return to Zero Test

This test ensures that, after all other tests have been completed success-

fully, the scanner/scale returns to zero. Remove all weights from the scale

and verify that the scale reads 0.00 lb.

After completing this test, close the calibration access cover and seal per

local Weights and Measures requirements. This final step must agree with

the legal requirements of your state or local government.

You have completed the calibration and verification process for weighing

in pounds.

If the scanner/scale passes all these tests,

1. Remove the weigh platter, install the calibration switch cover and

install a seal (if required).

2. Reinstall the weigh platter.

If the scanner/scale fails any of these tests, it should be serviced by a quali-

fied technician.

NOTE

If the upper weight limit for your scale is not set at 30 pounds, begin by plac-

ing weight equaling your upper limit setting.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 543 544

Comments to this Manuals

No comments

Datalogic MAGELLAN 8400 Specifications Page 112

Comments to this Manuals

Related products and manuals for Bar code readers Datalogic MAGELLAN 8400