Datalogic GRYPHON Specifications download pdf (Page 28)

Setup

Gryphon™ I GD4100/GM4100/GBT 4100/L GD4300

BT Models only

Remember: The mandatory condition for establishing a new linking between a BT handheld

and a BT base is that the handheld is unlinked and they share the same security configuration. A

successful link is indicated by three ascending tones from the reader. A high-low-high-low tone

indicates the link attempt was unsuccessful. A single green LED flash after this tone indicates no

Base Station was discovered. Two green LED flashes after this tone indicates that more than one

Base Station was discovered and the reader did not link. Three LED flashes after this tone

indicate a security error.

Linking a BT Reader to a PC

The reader can optionally be linked to a Bluetooth-enabled PC with the serial port profile, in

either server mode or client mode, or with human interface device profile (HID).

Linking to a PC in Server Mode (BT Slave Mode)

To link a BT reader in server mode to a Bluetooth-enabled PC, follow these steps:

1. Install any drivers provided with the Bluetooth adapter.

2. Scan the

Link to a PC in Server Mode

barcode to make the scanner visible to the host com-

puter..

Link to a PC in Server Mode

3. Use the host computer’s Bluetooth manager to “Discover new devices” and select "Data-

logic Scanner." If you receive an error message, it may be necessary

to disable security on

the device.

4. Select “connect” on the PC to link the reader to the PC. Use an RS-232 terminal program

to see incoming data on th

e port designated by the computer's Bluetooth manager.

Linking to a PC in Client Mode (BT Master Mode)

The reader can optionally be linked in client mode to a Bluetooth-enabled PC with the serial

port profile. To do this, follow these steps:

1. Ensure the PC or terminal can network with Bluetooth devices

and that it is powered on.

2. Ensure that a COM port is assigned under Services within the Bluetooth setup menu.

3. Create a Link label that contains the address of the

PC Bluetooth adapter.

NOTE

The Bluetooth address can be found under "Properties" within in

the Bluetooth setup menu.



1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 369 370

No comments

Datalogic GRYPHON Specifications Page 28