Datalogic CBX500 Installation Manual download pdf (Page 19)

INSTALLATION

Finally the frame Height (H) can be calculated by the following formula:

H = Conveyor Height + Wmin + Max Reading Distance + STS400 Width + Safe Length - Foot

Where:

 Safe Length is an extra length of 50 to 100 mm on the top of the frame, used for fine

adjustment at installation time (if needed);

 Foot is usually considered to be roughly 50 mm:

50 mm

2.1.4 Frame Bill Of Materials

We suggest using Bosch aluminum profiles; although any other brand can fully satisfy this

purpose.

The 45 x 45 mm profile section is the best compromise between frame stability and price.

The following bill of materials indicates a list of generic profiles: W, L and H.

Description Quantity

Profile W 3

Profile L 6

Profile H 4

Angular brackets 20

Note: It is suggested to double the angular brackets on both the ends of the profile

supporting the STS400™:

Angular

Brackets

Once the frame has been fully mounted, the STS400™ can be mechanically mounted.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 64 65

No comments

Datalogic CBX500 Installation Manual Page 19