Datalogic PDA Specifications download pdf (Page 13)

Batteries

Product Reference Guide 1-3

WARNING

Lithium-ion Polymer battery packs can get hot, explode, ignite and/or cause serious

injury if exposed to abusive situations. Follow the safety warnings listed below:

• Do not place the battery pack in fire or heat the battery.

• Do not install the battery pack backwards so the polarity is reversed.

• Do not connect the positive terminal and negative terminal of the battery pack

to each other with any metal object (such as wire).

• Do not carry or store battery pack together with metal objects.

• Do not pierce the battery pack with nails, strike the battery with a hammer, step

on the battery or otherwise subject it to strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose battery pack to liquids, or allow the battery contacts to get wet.

Do not disassemble or modify the battery pack. The battery pack contains safety and

protection devices, which, if damaged, may cause the battery pack to generate heat,

explode or ignite.

Do not discharge the battery pack using any device except for the specified device.

When it is used in devices other than the specified device, the battery pack can be

damaged or its life expectancy reduced. If the device causes an abnormal current to

flow, it may cause the battery pack to become hot, explode or ignite and cause

serious injury.

In the event the battery pack leaks and the fluid gets into one's eye, do not rub the

eye. Rinse well with water and immediately seek medical care. If left untreated, the

battery fluid could cause damage to the eye.

CAUTION

If you remove the battery pack or perform a a cold reset on the PDA, you will loose any

data currently in RAM memory.

When you remove the battery pack, the unit automatically performs a cold reset. It is a

good idea to store any important data in the resident DiskOnChip (Flash memory) for

this reason. Refer to "Flash Memory" on page

2-11 for information on using and

accessing Flash Memory.

Always charge the battery pack within the temperature range of 32°–113°F (0°–45°C).

Do not place the battery pack in microwave ovens, high-pressure containers or on

induction cookware.

Immediately discontinue use of the battery pack if, while using, charging or storing

the battery, it emits an unusual smell, feels hot, changes color or shape, or appears

abnormal in any other way.

Do not place the battery pack in or near fire, on stoves or other high temperature

locations. Do not place the battery pack in direct sunlight, or use or store the battery

pack inside cars in hot weather. Doing so may cause the battery pack to generate

heat, explode or ignite. Using the battery pack in this manner may also result in a loss

of performance and a shortened life expectancy.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 115 116

Comments to this Manuals

No comments

Datalogic PDA Specifications Page 13

Comments to this Manuals

Related products and manuals for Handheld mobile computers Datalogic PDA