Datalogic DS4800 Technical Information download pdf (Page 10)

DS4800 OM QUICK GUIDE

RESET SCANNER TO FACTORY DEFAULT (OPTIONAL)

If it ever becomes necessary to reset the scanner to the factory default values, you can perform this procedure by

holding the X-PRESS™ push button pressed while powering up the scanner. At the end of the procedure (about

5-6 seconds), the Configuration and Environmental parameters are reset, all LEDs blink simultaneously 3 times

and the message "Default Set" is shown on the display.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Datalogic DS4800 Technical Information Page 10