Datalogic GryphonD432 Instruction Manual download pdf (Page 8)

DATALOGIC

INDICATORS

LED INDICATORS

The Gryphon™ D432/D432E has one green LED indicator signaling the

following reader functions:

STATUS BEHAVIOR

Power ON The LED lights up for 2 seconds to signal

the power supply is present.

Power ON with USB (without

external power supply)

The LED blinks until the Host accepts the

device.

Normal Function The LED lights up after a good decoding

and will switch off only at the next trigger

press.

BEEPER

The Gryphon™ D432/D432E basic software provides beeper signals for

good/wrong reading and for indicating errors. Its tone, volume and duration can

be directly configured by using the codes given in the Gryphon™ D432/D432E

Reference Manual available on the website.

The application program can also manage the beeper (User Defined Beeper)

when the reader is controlled by a Host PC. It is possible to activate the beeper

by sending a command from the Host to the reader via the current

communication interface.

GOOD READ SPOT

It is possible to enable a green good-read spot, which will be projected in the

field of view when the reading is successful.

SETUP

1. Make connections between Gryphon™ D432/D432E and the Host PC

using the correct interface cable.

2. Read the correct Interface Selection code.

Your reader is now ready to read codes using the default settings.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

No comments

Datalogic GryphonD432 Instruction Manual Page 8