Datalogic GryphonD432 Instruction Manual download pdf (Page 16)

DATALOGIC

DEFAULT CONFIGURATION

RS232 Standard DEFAULT SETTINGS

115200 baud, no parity, 8 data bits, 1 stop bit, no handshake, no protocol,

FIFO enabled, intercharacter delay = 0, intercode delay = 0

USB COM Emulation DEFAULT SETTINGS

no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode

dela

= 0

USB Keyboard Emulation DEFAULT SETTINGS

USA keyboard*, intercharacter delay = 0, intercode delay = 0, FIFO enabled,

keyboard speed = normal

WEDGE Communication DEFAULT SETTINGS

USA keyboard*, CapsLock OFF, CapsLock Auto-Recognition ON, NumLock

OFF, intercharacter delay = 0, intercode delay = 0

DATA FORMAT – Symbology Independent Parameters

custom code identifier disabled, code identifier disabled, code length disabled

Default headers and terminators*:

- RS232: no header, terminator = CR-LF

- USB BULK: no header, terminator = CR-LF

- USB COM: no header, terminator = CR-LF

- USB Generic HID: no header, terminator = CR-LF

- Wedge: no header, terminator = ENTER

- USB Keyboard: no header, terminator = ENTER

DATA FORMAT – Symbology Dependent Parameters

symbology specific format = select all, no headers, no terminators, symbology

character substitution disabled, symbology character deletion disabled

DATA FORMAT – Concatenation

Concatenation disabled, 2 EAN/UPC codes concatenated, Set First

Concatenated Code Length 000 = any length, Set Second Concatenated

Code Length 000 = any length, Set Third Concatenated Code Length 000 =

any length, Set Fourth Concatenated Code Length 000 = any length,

Concatenation with Intercode Delay disabled, Concatenation Timeout 10

seconds, Concatenation Failure Transmission = Tx codes causing failure,

Transmission after Timeout = No code transmission, Concatenation Result

Code ID = No code Identifier

ADVANCED FORMATTING PARAMETERS

format disabled

CAMERA CONTROL

exposure mode = automatic, based on entire image

* The default values of these parameters are set when reading the interface

selection.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

No comments

Datalogic GryphonD432 Instruction Manual Page 16