Datalogic MAGELLAN 8400 Specifications download pdf (Page 68)

5-4 Magellan

8300/8400

Scale Enforced Zero Return

This feature enables/disables the enforced zero return of the scale. Three

settings are available for this feature:

• Disable

• Scale Must Return to Zero Weight Within Two Minutes — Scale

will require re-zeroing if a non-zero w eight is left on for more than

two minutes or if the scale is below zero.

• Scale Must Return to Zero Weight Between Weight Requests — Re-

zeroing is required if weight doesn't return to zero between weight

requests from the POS, plus scale will require re-zeroing if a non-

zero weight is left on for more than two minutes or if the scale is

below zero.

• Non-Zero for Two Minutes — Re-zeroing is required if weight does

not return to zero within two minutes.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan. The strategy is

to select the lowest possible filter level needed that allows normal

scale operation.

3. Complete the programming sequence by scanning the SWITCH

bar code.

SCALE ENFORCED ZERO RETURN = DISABLE

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 93 94

No comments

Datalogic MAGELLAN 8400 Specifications Page 68